5 Reasons why ArmorAll is bad for dashboards (+4 Alternatives)

does-armorall-crack-your-dashboard

When it comes to car care, there are a lot of misconceptions. One of the most common is that ArmorAll is safe to use on the dashboard. Many people believe that this will protect their dash from cracking and fading. In this article, we will explore whether or not ArmorAll is safe to use in the dashboard and provide some tips for keeping your dash looking new!

So is Armor safe to use on your dashboard? The surprising answer is no! ArmorAll contains chemicals that can damage your dashboard. Keep reading to find out more about why ArmorAll is not safe to use in the dashboard.

Reasons Why ArmorAll Is Bad For Your Dashboard

  • The chemicals in ArmorAll can damage your dashboard.
  • ArmorAll can cause cracking and fading.
  • ArmorAll makes it difficult to see through your windshield.
  • Slippery dashboard
  • Attract dust

Let’s explore each one of these factors in a little more detail.

1. Chemical Components Can Cause Damage

One of the most common chemicals found in ArmorAll is silicone. Silicone can cause your dash to crack and fade. It can also make it difficult to remove dirt and debris from your dash. In addition, ArmorAll leaves behind a greasy residue that can attract dust and dirt.

I quite remember when I had my first car and wanted to keep my dashboard looking super clean and shiny and decided to use ArmorAll. After a while, I noticed some cracks on the dashboard and decided to find out the cause. After doing some research, I found out that it’s not good to use because of the chemicals it contains which can damage the dashboard.

2. Cracking And Fading

Another common problem with using ArmorAll on your dashboard is that it can cause cracking and fading. The chemicals in ArmorAll can break down the finish on your dash, causing it to crack and fade over time.

Dashboards are mostly made out of plastic these days and the chemicals in ArmorAll can cause the plastic to break down and crack.

3. Difficulty Seeing Through The Windshield

ArmorAll can also make it difficult to see through your windshield. The chemicals in ArmorAll react with the plastic in your windshield, causing it to become cloudy and opaque. This can be a safety hazard, as it can make it difficult to see while driving.

You might not immediately notice this but after using ArmorAll on your windshield for a while, you’ll start to notice that it’s harder to see through because it becomes cloudy.

4. Slippery Dashboard

Again, ArmorAll causes a slippery surface on your dashboard. The chemicals in ArmorAll make the dash surface slick and shiny. This can be a safety hazard, as it can cause your phone or other objects to slip off of the dash whilst driving which can be a distraction.

5. Attract Dust

Finally, ArmorAll leaves behind a greasy residue that can attract dust and dirt. The chemicals in ArmorAll make it difficult to remove the grease from your dash. This can cause your dash to become stained and dirty over time.

If you are someone who cares about their car and wants to keep it clean, using ArmorAll is not a good idea because it will eventually attract dirt and dust and be hard to remove.

As you can see, there are many reasons why ArmorAll is not safe to use in the dashboard.

There are many other products on the market that are better alternatives to ArmorAll such as Aerospace 303. This product is made specifically for use on dashboards and will not damage your dash. I recommend checking out some of these alternatives to keep your dashboard looking new.

Keep reading to find out about tips for keeping your dashboard looking new

Tips For Keeping Your Dashboard Looking New

  • Wipe down your dashboard with a clean, soft cloth.
  • Use a cleaner that is specifically designed for dashboards.
  • Avoid using harsh chemicals or cleaners on your dash.
  • Apply a protectant to your dash to help keep it looking new.
  • Let’s explore each one of these factors in a little more detail.

1. Wipe The Dashboard With a Clean, Soft Cloth

The first tip I will share with you is to wipe down your dashboard with a clean, soft cloth. This will help remove any dirt or debris that has accumulated on the dash. A clean and soft cloth will help prevent scratching or damaging the dash.

I have been using this method for years and it works great. I use a clean, soft cloth to wipe down my dashboard every week. This helps keep my dash looking new and prevents any dirt or debris from building up.

2. Use a Dashboard Cleaners

The second tip is to use a cleaner that is specifically designed for dashboards. There are many cleaners on the market that are safe to use on dashboards and will not damage the finish. These cleaners will help remove dirt, grime, and fingerprints without damaging the dash. All you have to do is spray the cleaner on a clean, soft cloth and wipe down the dash.

I have used many different dashboard cleaners over the years and they all work great. I would recommend Aerospace 303 or try out a few different ones to find one that you like.

3. Avoid Using Harsh Chemicals or Cleaners

The third tip is to avoid using harsh chemicals or cleaners on your dash. Harsh chemicals can damage the finish of the dash and make it more difficult to clean. Stick to using cleaners that are specifically designed for use on dashboards.

I have found that using harsh chemicals or cleaners on my dashboard just ends up damaging the finish. I would recommend avoiding them altogether.

4. Apply a Protectant

The fourth and final tip is to apply a protectant to your dash. This will help keep the dash looking new and prevent dirt and debris from sticking to the surface. There are many different dashboard protectants on the market. All you have to do is spray the protectant on a clean, soft cloth and wipe down the dash.

As you can see, there are many different ways to keep your dashboard looking new. These tips will help you keep your dash clean and prevent any damage from occurring.

Alternative Ways To Clean The Dashboard

Many other methods can be used to clean the dashboard. Some people use a vacuum cleaner with a soft brush attachment to remove dirt and dust. Others use a microfiber cloth to gently wipe down the dash.

I have found that the best way to clean my dashboard is by using a combination of all of these methods. I start by vacuuming the dash with a soft brush attachment. This helps remove any loose dirt and dust. Next, I use a microfiber cloth to gently wipe down the dash. Finally, I apply a protectant to the dash to help keep it looking new.

By following these tips, you can keep your dashboard looking new for years to come

Final Thought

To conclude I will strongly advise you against using ArmorAll on your dashboard. While it may make it look good for a short period, it will eventually damage the finish. There are many other products on the market that are specifically designed for use on dashboards. These products will not damage the finish and will help keep your dash looking new.

I hope you found this article helpful. If you have any questions or comments, please feel free to leave them below. Thanks for reading!

P.S. – If you are looking for a great dashboard cleaner, I would recommend Aerospace 303. It is safe to use on dashboards and will not damage the finish.

Motorsnitch

Welcome to Motorsnitch, your trusted resource for diagnosing and fixing common car problems. Whether you are an experienced mechanic or a curious car owner, we provide clear and concience step-by-step guides to help you troubleshoot and repair your vehicle. Our mission is to empower you with the knowledge and confidence to keep your car running smoothly without unnecessary trips to the shop.

Recent Posts